top of page
Our team would appreciate all sizes in mm where possible. Unless otherwise stated, we list width before height in all measurements of Roller Garage Doors, the size of your Roller Garage shutter curtain, box and guides. The below method will give us a basic understanding of your requirements, and is enough for us to assess which Roller Garage Door may be suitable. If you are familiar with measuring Roller Garage Doors and would like more detail regarding curtain, box and guide sizes, Please follow the instructions below to find sizing. Contact a member of our team for an idea of cost based on your measurements.
This is simply the available space within the opening. Measure the width and height, ideally along multiple points for better accuracy.
Roller Garage Door is fitted to the inside wall, above the opening. This is the most common location and is an available option
Roller Garge Door face fit installations (both internal and external), we will also need to know roughly how much room is available around the Roller Shutter Garage Door. The sides will need to accommodate the guide channels (usually between 66mm and 90mm, although can be larger or smaller dependent on requirements). The wall above the opening will need to accommodate your Endplates/box (between 205mm or 300mm)
When headroom does not permit internal fixing doors can be fixed to the external face. This means the box is visible from outside and the concave face of the curtain slats face outwards.
The Roller Garage Door is fitted within the opening, underneath the lintel. A reveal fix is most commonly used when face fixing is not possible. It requires good headroom within the opening, but no wall space above it. Any required fitting space for the box, plates or guides will be taken from the opening instead.
bottom of page